Ubiquiti UniFi Switch Pro Max 24 PoE USW-Pro-Max-24-PoE

Mechanical

Dimensions

442 x 325 x 44 mm (17.4 x 12.8 x 1.7")

Weight

Without mounting brackets: 5.1 kg (11.3 lb)
With mounting brackets: 5.2 kg (11.5 lb)

Enclosure material

SGCC steel

Hardware

Management interface

Ethernet In-Band

Networking interface

(16) GbE RJ45 ports
(8) 1/2.5 GbE RJ45 ports
(2) 10G SFP+ ports

PoE interface

(8) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)

Total non-blocking throughput

56 Gbps

Switching capacity

112 Gbps

Forwarding rate

83.328 Mpps

Power method

(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input

Power supply

AC/DC, internal, 450W

Supported voltage range

100—240V AC

Max. power consumption

50W (Excluding PoE output)

Total available PoE

400W

Max. PoE wattage per port by PSE

PoE: 15.4W
PoE+: 30W
PoE++: 60W

Voltage range PoE mode

PoE: 44—57V
PoE+: 50—57V

LCM display

(1) 1.3" touchscreen

Button

Factory reset

Ambient operating temperature

-5 to 40° C (23 to 104° F)

Ambient operating humidity

10 to 90% noncondensing

Certifications

CE, FCC, IC

Switching Features

Layer 2 features

IGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs

Layer 3 features

DHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs

Etherlighting™

Ethernet

Locating
Speed/link
Native VLAN/network

SFP+

Locating
Speed/link
Native VLAN/network

LEDs

System

Status

RPS

Status

Application Requirements

UniFi Network

Version 8.0.24 and later