KEY HIGHLIGHTS:
- Max 5.2Gbps (Total 6 Spatial Streams) with Concurrent Dual-Band Design
- Max 1024 Client connections
- OFDMA, MU-MIMO and BSS Technology for minimal wireless signal interference
- IoT Ready: Integrated with BLE module and one IoT extension port with PoE Out (passive)
- AI Wireless Optimization: one-click optimization powered by Ruijie WIS technology
- Hybrid Management: support standalone AP to over thousands of APs with deployment options of appliances, private cloud or public cloud service
- Mobility Management: Free mobile app available for RG-MACC-Base private cloud or Ruijie Public Cloud customers
SPECIFICATIONS:
Model |
RG-AP840-I |
|
Hardware specifications |
||
Radio |
Dual-radio dual-band: Radio 1: 2.4G 11n: 2×2 MIMO Radio 2: 5G 11ax: 4x4 MIMO |
|
Protocol |
Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac |
|
Operating Bands |
802.11b/g/n :2.4G ~ 2.483GHz 802.11a/n/ac/ax : 5.150~5.350GHz,5.47~5.725GHz,5.725~5.850GHz (vary depending on different countries) |
|
Spatial Streams |
Up to 6: 2×2:2 in 2.4GHz , 4×4:4 in 5GHz |
|
Max Throughput |
Maximum throughput of 2.4G: 400Mbps Maximum throughput of 5G: 4.8Gbps Maximum throughput per AP: 5.2Gbps |
|
Modulation |
OFDM:BPSK@6/9Mbps,QPSK@12/18Mbps,16-QAM@24Mbps,64-QAM@48/54Mbps DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM OFDMA (up to 1024-QAM) |
|
Receiver Sensitivity |
11b:-96dBm(1Mbps),-93dBm(5Mbps),-89dBm(11Mbps) 11a/g:-91dBm(6Mbps),-85dBm(24Mbps),-80dBm(36Mbps),-74dBm(54Mbps) 11n:-90dBm(MCS0),-70dBm(MCS7),-89dBm(MCS8),-68dBm(MCS15) 11ac HT20:-88dBm(MCS0), -63dBm(MCS9) 11ac HT40:-85dBm(MCS0), -60dBm(MCS9) 11ac HT80:-82dBm(MCS0), -57dBm(MCS9) 11ax HT80:-82dBm(MCS0), -57dBm(MCS9), -52dBm(MCS11) 11ax HT160:-80dBm(MCS0), -49dBm(MCS11) |
|
Antenna |
Integrated antenna design |
|
Antenna Gain |
2.4G: 3dBi 5G: 3dBi |
|
Service Ports |
3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out) |
|
Management Port |
1 console port |
|
USB |
1 USB 2.0 port |
|
IoT Capability |
BLE |
|
Reset Button |
Support |
|
Anti-theft Lock |
Support |
|
LED Indicator |
1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.) |
|
Transmit Power |
≤100mw(20dBm) (vary depending on different countries) |
|
Adjustable Power |
1dBm |
|
Power Supply |
Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed.) PoE+ (802.3at) PoE (802.3af) – Not recommended: 5G radio is degraded to 2x2 MIMO, and the PoE out of the LAN3/ IoT port is disabled |
|
Power Consumption |
<25.4W |
|
Physical Specifications |
||
Temperature |
Operating Temperature: -10°C to 50°C |
|
Storage Temperature: -40°C to 70°C |
||
Humidity |
Operating Humidity: 5% to 95% (non-condensing) |
|
Storage Humidity: 5% to 95% (non-condensing) |
||
Installation Mode |
Ceiling/wall-mountable |
|
Dimensions (W x D x H) |
220mm ×220mm x48.85mm(Height of the AP only, excluding the mount kit) |
|
Weight |
1.30kg |
|
IP Rating |
IP41 |
|
MTBF |
250,000 hours |
|
Certifications and Compliance |
||
Safety Standard |
GB4943, EN/IEC 60950-1 |
|
EMC Standard |
GB9254, EN301 489 EN 55032 , EN 61000, EN 55035 |
|
Health Standard |
EN 62311 |
|
Radio Standard |
SRRC, EN300 328, EN301 893 |
|
Software Specifications |
||
WLAN |
Maximum clients per AP |
1024 |
BSSID capacity |
Up to 32 |
|
SSID hiding |
Support |
|
5G Priority (Band Steering) |
Support |
|
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID |
Support |
|
Remote Intelligent Perception Technology (RIPT) |
Support |
|
Intelligent device recognition technology |
Support |
|
Intelligent load balancing based on the number of users or traffic |
Support |
|
STA control |
SSID/radio-based |
|
Bandwidth control |
STA/SSID/AP-based bandwidth control |
|
Data encryption |
WPA(TKIP), WPA-PSK, WPA2(AES), WPA3, WEP(64/128 bits) |
|
PSK and web authentication |
Support |
|
PPSK authentication (For Employee) |
Support (require wireless controller) |
|
802.1x authentication |
Support |
|
PEAP authentication |
Support |
|
Data frame filtering |
Whitelist, static/dynamic blacklist |
|
User isolation |
Support |
|
Rogue AP detection and countermeasure |
Support |
|
Dynamic ACL assignment |
Support |
|
RADIUS |
Support |
|
CPU Protection Policy (CPP) |
Support |
|
Network Foundation Protection Policy (NFPP) |
Support |
|
IP |
IPv4 and IPv6 address |
Support |
Multicast routing |
Multicast to unicast conversion |
|
DHCP service |
DHCP Snooping, Option 82, Server, Client |
|
Management and Maintenance |
Supported wireless LAN controllers |
Ruijie WS Series Wireless Controller Ruijie MACC-Base Software Controller Ruijie Cloud (Public Cloud) |
Management protocol |
Telnet, SSH, TFTP, Web |
|
Wireless Intelligent AI Optimization Service (WIS) |
Support |
|
SNMP |
SNMPV1,V2c,V3 |
|
Syslog / Debug |
Support |
|
FAT/FIT/MACC mode switching |
Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management |
Retail price | 433.10€ (515.39€ Inc. VAT) |
- Stock: In Stock (15)
- Model: RG-AP840-I
- Weight: 1.00kg
- SKU: RG-AP840-I
- MPN: RG-AP840-I