Fiber Distribution Box 2 IN 16 OUT Uncut port

Fiber optic box equipped with 2 inputs and 16 outputs for fiber optic cables. It uses a stock-type cable gland, which makes it possible to route the fiber without cutting it first. Inside there is a hinged tray on which a frame for adapters is placed. If you want to weld the splitter directly to the cables, you can disassemble the frame if necessary. There are grooves under the tray where you can place the welds. At the very bottom, under the tray, there is a free space where you can hide a spare cable if you use grips (not included).

In the attached frame it is possible to place 16 SC simplex adapters or 32 LC duplex adapters. The muff at the back has a handle that allows it to be mounted on a pole with a steel tape or long bands. It is also possible to mount it on the wall using the dowels included in the set.

Protection degree: IP65

Cable diameters: entry hole - 15 mm, exit holes - 2x3 mm

Dimensions:

• Length: 300 mm
• Width: 222 mm
• Depth: 73 mm