±48 V DC telecom Open Frame Power supply with 12 V 7 A output, for use with Cloud Core Routers since revision "r2" or the new CCR2004-1G-12S+2XS and CRS326-24S+2Q+RM. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for ±48 V installations.
Although made specifi..
The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas.
The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro
it is possible to perfectly set antenna alignment using integrated graduated sca..
The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel, the mount attaches to a wall and allows the ethernet cables to be plugged in, before the router is mounted inside. This means that once the device is secured, there..
MikroTik RBGPOE Adapter PoE Gigabit injector on cable is a splitter that allows you to connect the power to the Ethernet cable. The splitter has an input for connecting the power supply, an Ethernet socket for connecting remote devices.
SPECIFICATIONS:
Product Code
RBGPOE
Input Voltage..
This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.
They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other ind..
12V 10.8A internal power supply for CRS326-24S+2Q+RM and CCR1036 series (only for new r2 revisions with dual power supplies), as well as new CCR2116-12G-4S+..
The ML-WAP-H is an improved ability to hold any MikroTik wAP unit on a 20-65mm diameter mast that allows elevation and a more stable hold than the plastic or metal strap. No drilling is required to install the MaxLink bracket on the wAP unit...
This Gigabit PoE (10/100/1000 Mbps) adapter powers MikroTik RouterBOARD’s and any other PoE powered devices.
Simply connect your power source and then use an ethernet cable to connect the injector to the device.Helps reducing number of wires that lead up the tower.Power over pins 4 and 5 is used to..