Model: GPeR
The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m.
Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem...
Model: GPeR-IP67-Case
Sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles. Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating with protection from immersion in water, as well as protection from dust. Get an outdoor enclosure for..
Model: ACGPSA
ACGPSA is standalone active GPS antenna, that works in 1575.4 MHz spectrum. Antenna size is 46.5 mm x 26.5 mm x 12.5 mm with IP67 rating and includes internal magnet and double sided tape, so it can easily be attached to various surfaces. It has a long 5m cable with an SMA connector, to be connected..
Out Of Stock
Model: 12POW150
CCR1072-1G-8S+, CR2216-1G-12XS-2XQ and CRS518-16XS-2XQ-RM units are equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over.
Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S/CCR2216-1G-12XS-2XQ and CRS518-16XS-2XQ-RM a..
Out Of Stock
Model: CCR-PSM-24V4A
MikroTik power module matching the CCR1016 and CCR1036 series devices. It has an output voltage of 24 V DC and an output current of 4A...
Model: CCR-PSM-12V5A
Power supply for MikroTika CCR1016 devices. Fits only CCRs in the second revision with the designation "r2". You can find revision information on the product label. The output voltage is 12 V, the output current 5 A. ..
Model: K-65
Rackmount ears for RB4011 series, for installing units in standard rack..
Model: K-79
With this kit you can mount up to four RB5009UG+S+IN routers in a single 1U rackmount space! No more server-room-Tetris, just pure productivity. ..
Out Of Stock
Model: RBLHGR-R11e-LTE
The LHG LTE kit is a device for remote locations that are within cellular network coverage. Mount it outdoors, on a pole, mast or any high enough structure, and connect even where cell phones can’t. Due to it’s large sized high gain antenna, the device is capable to connect to cell towers in extreme..
Out Of Stock
Model: RBLHGR-R11e-LTE6
The LHG LTE6 kit is a device for very remote locations that are within cellular network coverage. Mount it outdoors, on a pole, mast or any tall structure, and connect even where cell phones fail. Due to its large sized high gain antenna, LHG LTE6 kit can connect to cell towers in extreme rural loca..
Out Of Stock
Model: RBLHGGR-R11e-LTE6
Do you want high-speed Internet in the middle of nowhere? Then you want our newest LHGG LTE6 kit! It is a device for “last mile” Internet access in very remote locations. Mount it outdoors, on a pole, mast, or any tall structure, and connect even where cell phones fail. Due to its large high-gain 17..
Model: LHGGR&FG621-EA
An affordable last-mile-internet solution for the most remote areas. This is a 2024 refresh - with Gigabit Ethernet and the best price to date.
When mobile phone reception fails, the LHGG LTE6 kit steps in as your reliable last-mile-internet solution. Its large 17 dBi antenna and our latest Cat6 LT..